Cart 2 india

Specification
Brand : Mavaol
BulletPoint1 : Strong Compatibility: PEI build plate size is 255x255mm, suitable for Voron and other . The printing size of the spring steel platform of the 3D printer can be perfectly compatible with the machine.
BulletPoint2 : Cold Printing and Frost Effect: Strong adhesion, no glue, this PEI build plate can achieve cold printing, and printing without warping , printed products with frosting effect on the bottom, beautiful.
BulletPoint3 : Double Sided: When the temperature of the heated bed is around 60°C, excellent adhesion is achieved and you can print directly on each side of the double sided PEI platform without using additional tools.
BulletPoint4 : How to Operate: When the temperature of the heating bed reaches room temperature, the printed piece easily falls off the PEI plate. If the print gets stuck, gently bending the plate will help remove the print.
BulletPoint5 : Thickness: This platform's PEI coating thickness 0.25mm, and spring plate thickness 0.4mm, magnetic rubber plate thickness 1.2mm. The overall thickness is about 2mm.
ItemName : Mavaol 3D Printer Spring Steel Build Plate Double Sided PEI Powder Sprayed Magnetic Platform 255x255mm for Voron
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 29 centimeters
ItemPackageDimensions_Width : 29 centimeters
ItemTypeKeyword : 3d-printer-platforms
Manufacturer : Mavaol
ModelName : Mavaoltz0xvcpim3
ModelNumber : Mavaoltz0xvcpim3
NumberOfItems : 1
PartNumber : Mavaoltz0xvcpim3
ProductDescription : Item Type: Magnetic Spring Steel Plate Platform
Material: PEI Spraying Powder, Spring Steel, Soft Magnet
Size: Approx. 255 x 255mm / 10 x 10in
Use: Good 3D Printer Accessory Tool
PEI Spraying Thickness: Approx. 0.25mm / 0.01in
Spring Steel Plate Thickness: Approx. 0.4mm / 0.02in
Magnetic Rubber Plate Thickness: Approx. 1.2mm / 0.05in
Overall Thickness: Approx. 2mm / 0.08in

Package List：
1 x Spring Steel Plate Platform
1 x Magnetic Rubber Plate

Note:
It will also print PETG well, but the temperature of the hot bed needs to be around 80‑85°C.

ProductSiteLaunchDate : 2025-03-29T00:19:02.267Z
UnspscCode : 40100000