Cart 2 india

Specification
Brand : Wefuit
BulletPoint1 : 【New Material PLU Build Plate, not PEI Sheet】The new material build plate we have launched is not a traditional PEI sheet, it is made of a unique polymer. Both sides are coated with 0.125mm PLU coating sprayed then dipped in high quality polymer based coating for power adhesion to the surface. This design not only enhances the durability of the build plate, but also improves the stability of the printed part, far exceeding traditional PEI, making room temperature printing possible with strong adhesion. It helps greatly improve the success rate of printing and save energy.
BulletPoint2 : 【Room Temperature Printing】The PLU build plate ensures warp-free printing at room temperatures. This allows you to keep the auxiliary fan on and eliminate concerns about drafts affecting your prints, even in open models like the P1P and A1.
BulletPoint3 : 【Unmatched Adhesion】The PLU build plate is compatible with PLA at a low temperature range of only 30-50℃, and PETG at only 50-70℃. It performs better in model adsorption than traditional PEI sheets, even at lower temperatures, thanks to its superior first-layer adhesion. No glue or hairspray is needed, and it prevents edge warping and print falling off. Note: ABS and TPU filament are not recommended for use with this build plate.
BulletPoint4 : 【Energy-Saving】The PLU build plate effectively prevents clogs caused by extruder overheating, eliminating the need for extruder maintenance. Additionally, it saves 50W/h of power compared to traditional PEI build plate printing that requires bed heating, resulting in a 50% energy savings.
BulletPoint5 : 【Enhance the overhanging quality】PLU Sheet has better model adsorption than traditional PEI Sheet. Better solve the problems of edge warping and printing falling off. The plate can enhance the overhanging quality. For prying skirts,brims and other thin parts on the build surface use a plastic build plate scraper only. Using a steel spatula or metal blade may permanently scratch and damage the build plate.
BulletPoint6 : 【Effortless Prints Removal】 The Bambu Lab build plates enable easy prints removal. Simply bend the surface of the build plate, and your prints will detach cleanly without the need for any scraping or prying tools. It is compatible with Bambu Lab P1P, Bambu Lab P1S, Bambu Lab X1C, Bambu Lab X1,Bambu Lab X1E and Bambu Lab A1 3d printers.
BulletPoint7 : 【Easy to Clean】The Double Side Use PLU build plate surface can be cleaned with water only, avoiding the use of detergent or solvents. Strictly avoid using IPA, alcohol, or acetone to clean the surface, as these chemical detergents will destroy the coating and function of the plate, rendering it unusable.
BulletPoint8 : 【With QR Code】The plate is printed with a QR code to help the X1 series printer recognize and level better. And It does not affect the printing of P1 series and A1.and Our plates are thicker than the PEI plates on the market. The thick plates can support larger model printing without dents.
Color : For Anycubic Photon M5s
CompatibleDevices : Personal Computer
CompatibleMaterial1 : Acrylonitrile Butadiene Styrene
CompatibleMaterial10 : Polylactic Acid
CompatibleMaterial11 : Nylon
CompatibleMaterial2 : Plastic
CompatibleMaterial3 : Polyethylene Terephthalate Glycol
CompatibleMaterial4 : Stainless Steel
CompatibleMaterial5 : Polycarbonate
CompatibleMaterial6 : Thermoplastic Polyurethane
CompatibleMaterial7 : Polyethylene Terephthalate
CompatibleMaterial8 : Alloy Steel
CompatibleMaterial9 : Carbon Fiber
ExternallyAssignedProductIdentifier : 6973880790818
IncludedComponents : PEI+PEY Sheet Build Plate
ItemName : JUUPINE 2025 Upgraded PLU Build Plate for Bambu Lab X1 X1C X1E P1S P1P A1,Energy-Saving Room Temp Cold Printing,Double-Sided Textured Spring Steel Sheet No Require Glue Easy to Take Out Model.
ItemPackageDimensions_Height : 28.194 centimeters
ItemPackageDimensions_Length : 1.1938 centimeters
ItemPackageDimensions_Width : 26.6954 centimeters
ItemTypeKeyword : 3d-printer-platforms
Manufacturer : Wefuit
Material1 : PEI
Material2 : PET
Material3 : PEO
Material4 : PEY
ModelNumber : for K1 max
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : CryoGrip Coating Build plate 257X257
ProductDescription : This 2025 Upgraded PLU build plate is a revolutionary product made of a unique polymer that surpasses traditional PEI solutions. It can achieve room temperature cold printing, has strong adhesion, and can be easily printed without the need for glue. It can print large models without curling edges and is easy to take model. This build plate greatly improves printing success rates and saves energy, making it the preferred choice for many farmers.
ProductSiteLaunchDate : 2024-10-31T06:22:57.989Z
Size : 310x315mm
Style : For Anycubic Photon M5s
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 44102600