Cart 2 india

Specification
Brand : FYSETC
BulletPoint1 : 【Model Item】A must-have 3d printer part, large size printing surface 420x420mm/16.5x16.5inch, which is enough for daily and household using, providing you larger printing space and more choices of creation. A good replacement for the stock carborundum glass platform.
BulletPoint2 : 420x420 build plate: This pc sticker works well for PLA TPU, ALSO suitable for high temperature ABS PETG filament. The heatbed temperature must be adjusted according the print filaments.
BulletPoint3 : 【Customizable】Size:420x420mm, 420 3d printer bed, may be compatible with printers such as the Anycubi KobraMax, AnycubicChiron, Form bot t-rex 2+, CR10 S4, and others with 410x410mm build plates. NOTE: The Anycubi KobraMax has a build plate size of 430x410mm, so there will be a small gap at the rear side of the build plate. This does not affect the build area. This flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models, if can accept 1-10mm, also fit 430 mm build plate.
BulletPoint4 : 【Easy Installation】To install, Use the tape on the back to stick this soft sticker on the unheated platform. Adjust the hot bed with eleveler, then start printing. Sometimes Glue stick will do a good job on the bed adhesion.
BulletPoint5 : 【Easy Print Removal】 Small prints will pop off automatically once the bed cools, and larger prints can be flexed off the pc sheet with ease if you stick it onto a bare spring steel plate. It is recommended to heat the hot bed for 2-3 minutes before removing the model with the removal tools.
IncludedComponents : spring steel plate
ItemDisplayWeight : 102 grams
ItemName : FYSETC 3D Printer PC Sticker Sheet 420x420mm Build Plate Platform: Ultra Flexible Frosted Heated Bed Cover Back with Adhesive Easy Install for 3D Printing Material PLA ABS PETG TPU Filament 1.75
ItemPackageDimensions_Height : 43 centimeters
ItemPackageDimensions_Length : 3.7 centimeters
ItemPackageDimensions_Width : 42.5 centimeters
ItemShape : Square
ItemTypeKeyword : 3d-printer-platforms
Manufacturer : fuyuansheng
Material : pc
ModelName : Walfrontq4dre53owg
ModelNumber : WALFRONTq4dre53owg
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : US-PC sticker 420mm
ProductDescription : FYSETC New Flexible Plaid PC Sticker Sheet 420X420mm/16.5x16.5mm,Only for PLA and PLA-based TPU 3d printer filament,not for ABS PETG High Temperature printing material. Works with all FDM Printer Models, and all heated and non-heated 3d printer beds.
Large Size:420x420mm/16.5x16.5inch
Shape: Square
Color: black and white check board
Temperature:Recommend from 50-75 degrees centigrade（122-167℉),not exceed 75 degrees/167℉

Note: Please do not let heated nozzle touch the plate directly.
Please level the build plate well before printing.
ProductSiteLaunchDate : 2023-11-13T15:00:53.660Z
Size : 420x420mm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 31160000