Cart 2 india

Specification
Brand : Gearwell
BulletPoint1 : [2 SIDED COATING] The steel plate has gold powder and smooth PEI double sided coating, which can meet 2 kinds of printing requirements.
BulletPoint2 : [SAFE ] Just put the flexible steel plate on the hot bed of the 3D printer to use, with convenient and safe .
BulletPoint3 : [EASY REMOVING] The steel plate can be easily removed by bending and ejecting, and it is easy to print and maintain.
BulletPoint4 : [SPRING STEEL] Made of excellent spring steel material, they will not kinks or warp when slightly bent, and they are easy to adhere to the printed .
BulletPoint5 : [PRODUCT SIZE] The size of the steel plate is 355 x 355mm, which can be used for the same size building plate, suitable for Voron 350 V2 model.
ItemName : Flexible Steel Plate, 355x355mm, PEI Double Side Hot Bed Sheet, Magnetic Sticker B Side, Compatible with Voron 350 V2, High Temperature Resistant
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 38 centimeters
ItemPackageDimensions_Width : 38 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-platforms
Manufacturer : Gearwell
ModelName : Gearwellgqop1k0zw3
ModelNumber : Gearwellgqop1k0zw3
NumberOfItems : 1
PartNumber : Gearwellgqop1k0zw3
ProductDescription :

Item Type: Flexible Steel Plate
Material: Steel
Color: Golden Steel Plate
Product Size: Approx. 355 x 355mm / 14 x 14in
Applicable Model: For Voron 350 V2
Print Reference Temperature:


Material Hot Bed Nozzle Description
PLA 50-60℃ 200-210℃ Support Both Sides.
ABS 70-120℃ 240-250℃ Recommended for powdered , the is easy to foam when the temperature of the smooth exceeds 80℃
PETG 60-85℃ 230-245℃ Support Both Sides
Carbon Fiber 50-60℃ 200-220℃ Support Both Sides. Close to PLA, hardened steel nozzle is recommended
TPU 50-60℃ 200-220℃ Support Both Sides
Wood 50-60℃ 200-220℃ Support Both Sides. Close to PLA

Package List：
1 x Steel Plate
1 x Magnetic Sticker B side and PEI Coating

Note:
1. The steel plate is elastic steel plate, and the printing plate needs to be flat when used, and the magnetic attraction is strong, which can firmly adsorb the plate on the plate.
2. The first layer sprinklers should not scratch the platform, otherwise the sprinklers will scratch the platform and wear out the sprinklers.
3. When printing the first layer, the nozzle should not be too far away from the platform, otherwise it will not stick to the printing platform, and the gaps between the nozzle and the steel plate should be about a piece of A4 paper.
4. The model cooling fan cannot be turned on for the first layer printing, otherwise it will affect the adhesion of the first layer printing.
5. Add a skirt when printing a model with a small .

ProductSiteLaunchDate : 2024-12-18T08:21:03.720Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 31160000