Cart 2 india

Specification
Brand : Jusnboir
BulletPoint1 : 【DOUBLE SIDE TEXTURED】Jusnboir 3D printer platform is a double-sided textured PEI sheet build palte. Features honeycomb-shaped surface and exraodinary flatness, make the bottom of your prints more flat and special.
BulletPoint2 : 【EXCELLENT ADHESION】After heating the 3D printer bed has strong adhesion, the model can be firmly attached to the surface. Without glue, the edges of the print will not curl. Even if you are a novice, you can print easily with this 3d printer accessories.
BulletPoint3 : 【HIGH-TEMP RESISTANT】The maximum temperature that the heated bed can withstand is 300°C, but we recommended you print at a tenperature lower than it better for maintain the print bed. The suitable temperature for PAL is 50-70℃,TPU is 50-70℃,PETG is 70-80℃ and ABS is 80-100℃.
BulletPoint4 : 【EASY TO REMOVE】Made of spring steel metal, you can bend up the platform and take off your prints after cooling down. It will return its original, so you can reuse it to save your money.
BulletPoint5 : 【WIDE COMPATIBILITY】The hot bed is compatible with CR-10/10S, A30/A30M/A30T/A30 PRO, A8/E12, X1/X2 3D printer. It is good to print PLA/PLA+/PETG/ABS/TPU/ASA/PVA/PET/PA/PC and more filaments.
ExternallyAssignedProductIdentifier1 : 0887503181555
ExternallyAssignedProductIdentifier2 : 887503181555
IncludedComponents : 3D Printer PEI Build Plate
ItemForm : Sheet
ItemName : 3D Printer Platform Double Sided Textured PEI Sheet Build Pate Honeycomb-Shaped Spring Steel Flexible Removable 3D Printer Bed for CR-10/10S/Anet A8/E12/SW-X1/X2 310x310 mm
ItemPackageDimensions_Height : 36.9062 centimeters
ItemPackageDimensions_Length : 1.1938 centimeters
ItemPackageDimensions_Width : 35.1028 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : 3d-printer-platforms
Manufacturer : TWOTREES
Material : polyetherimide
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : Honeycomb PEI 310mm
ProductDescription : Jusnboir 3D printer platform is a double-sided textured PEI sheet build palte, which looks like honeycomb and is suitable for most of filaments as PLA/PLA+/PETG/ABS/TPU/ASA/PVA/PET/PA/PC, etc. It is made of high-quality spring steel so you can easily pop up your prints from the hot bed. It can withstand 300℃ without warping. Extraordinary flatness and adhesion, making your printing process more stable. Multiple size , more choices, you will find the build plate compatible with your 3D printer.
ProductSiteLaunchDate : 2024-05-29T10:53:07.040Z
Size : 310 x 310 mm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 31160000