Cart 2 india

Specification
Brand : Usongshine
BulletPoint1 : Good Torque Good Speed;Step Angle 1.8°
BulletPoint2 : Planetary Gearbox Ratio 5.18:1
BulletPoint3 : Nema 17 Bipolar Stepper Motor
BulletPoint4 : Rated current 1.68A & resistance 1.65ohms
BulletPoint5 : Each Nema 17 stepper motor has undergone a rigorous quality control ex works. If need further please fell free contact us, we very happy to assist you.
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 8720011032563
ExternallyAssignedProductIdentifier1 : 715776688221
ExternallyAssignedProductIdentifier2 : 701056560295
ExternallyAssignedProductIdentifier3 : 0715776688221
ExternallyAssignedProductIdentifier4 : 0701056560295
Horsepower : 1 horsepower
ItemName : Usongshine Nema 17 Geared Stepper Motor Gear Ratio 5.18:1 Planetary Gearbox for 3 D Printer DIY CNC Robotics
ItemPackageDimensions_Height : 18.6944 centimeters
ItemPackageDimensions_Length : 6.5024 centimeters
ItemPackageDimensions_Width : 8.001 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-motors
Manufacturer : Usongshine
Material : lead
ModelName : gear
ModelNumber : Nema 17 Stepper Motor
NumberOfItems : 3
PartNumber : Nema 17 Stepper Motor
ProductDescription : Electrical Specification:
* Manufacturer Part Number: 17HS4401S-PG518
* Motor Type: Bipolar Stepper
* Step Angle(W/O Gearbox) :1.8°±5%
* Holding Torque: 1.68Nm
* Rated Current/phase: 1.68A
* Phase Resistance: 1.65ohms
* Inductance 3.2mH±20%(1KHz)

Gearbox Specifications:

* Gearbox Type: Planetary
* Gear Ratio: 5.18:1
* Efficiency: 90%
* Backlash at No-load:1 deg.
* Max.Permissible Torque: 2Nm(283oz-in)
* Moment Permissible Torque: 4Nm(566oz-in)
* Shaft Maximum Axial Load: 50N
* Shaft Maximum Radial Load: 100N

Physical Specifications:
* Frame Size: 42 x 42mm
* Motor Length: 40mm
* Gearbox Length: 27.3mm
* Shaft Diameter: 8mm
* Shaft Length: 20mm
* D-cut Length: 15mm
* Number of Leads: 4
* Lead Length: 1M
* Weight: 455g

Connection:
Black(A+), Green(A-), Red(B+), Blue(B-)

Warning:
Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.

ProductSiteLaunchDate : 2019-07-06T07:00:00.000Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 26111500
Voltage : 1.6 volts