Cart 2 india

Specification
Brand : STEPPERONLINE
BulletPoint1 : 【Quality security】High Quality 42-40 stepper motor applies for E-Axis of CR 10 Max/ CR 10 Smart/ CR 10S Pro V2/ CR 30/ CR 6 Max/ CR 6 SE/ CR X/ CR X Pro/ Ender 3 Max/ Ender 3 Neo; X-Axis of CR 10 Max/ CR 10S Pro V2/ CR X/ CR X Pro; Y-Axis of CR 10 Smart/ CR 10 V2/ CR 10 V3/ CR 6 SE/ Ender 3 Max/ Ender 3 Max Neo.
BulletPoint2 : 【High-quality Stepper Motor】3D Printer motor with low noise and efficient heat dissipation has large torque and high precision without losing steps. 1.8-degree step angle, 0.4N.M holding torque, with 1A rated current per phase. This means that you can save on the cost of replacing or repairing the engine.
BulletPoint3 : 【Low Noise Stepper Motor】The high-quality motor with low power, uniform speed, stable performance, high accuracy, low noise, and no step to lose during the operation, which ensures the extrusion mechanism stable operation. This greatly reduces the vibration and noise when the motor is working, keeps you focused, and provides a quiet printing experience for colleagues and family.
BulletPoint4 : 【Precise Rotation】Perfectly fits with the high-strength synchronous wheel and synchronous gear, it realizes accurate constant ratio, uniform revolution, and high transmission efficiency, while avoiding system errors and obtaining accurate results. Shaft diameter: 5mm
BulletPoint5 : 【After Sales Support】Engineers provide Good customer service with 12-months limited and lifetime technical assistance. Please kindly contact us(seller) via “ask a question” find us directly, cause our customer service will respond to you within 24 hours no matter what question.
ExternallyAssignedProductIdentifier1 : 701056537488
ExternallyAssignedProductIdentifier2 : 0701056537488
Horsepower : 1 kilowatts
IncludedComponents : Motor
ItemName : STEPPERONLINE Nema 17 Unipolar Stepper 1.8deg 12v 0.4A 32Ncm/45.3oz.in 42x42x48mm 6-wires DIY
ItemPackageDimensions_Height : 6.35 centimeters
ItemPackageDimensions_Length : 11.176 centimeters
ItemPackageDimensions_Width : 7.62 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-motors
Manufacturer : STEPPERONLINE
ModelNumber : 17HS19-0406S
NumberOfItems : 1
PartNumber : 17HS19-0406S
ProductDescription : This is bipolar Nema 17 stepper motor with 1.8° step angle (200 steps/revolution). Each phase draws 400mA at 12V, allowing for a holding torque of 32Ncm(45.3oz.in).

Electrical Specification

* Manufacturer Part Number: 17HS19-0406S
* Motor Type: Unipolar Stepper
* Step Angle: 1.8°
* Holding Torque: 32Ncm(36.24oz.in)
* Rated Current/phase: 0.4A
* Phase Resistance: 30.0ohms
* Recommended Voltage: 12-24V
* Inductance : 25mH±20%(1KHz)

Physical Specification
* Frame Size: 42 x 42mm
* Body Length: 48mm
* Shaft Diameter: Φ5mm
* Shaft Length: 24mm
* D-cut Length: 15mm
* Number of Leads: 6
* Lead Length: 500mm
* Weight : 380g

Connection:

Black(A+), Yellow(O), Green(A-), Red(B+), White(O), Blue(B-)

Warning:

Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.
ProductSiteLaunchDate : 2015-04-17T08:06:22.825Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 26111500
Voltage : 12 volts