Cart 2 india

Specification
Brand : STEPPERONLINE
BulletPoint : The Thinnest Nema 17 Closed Loop Steper Motor
BulletPoint1 : This DC12V 11RPM N20 right angle metal Micro gear motor is used for printing pen
BulletPoint2 : This DC motor features large moment of force, low speed, and low noise.
BulletPoint3 : The motor is made of metal gear, wear-resisting, avoid tooth breaking, so with long serving life.
BulletPoint4 : This motor is adopted of pure copper wire coil, with low heat and low loss.
BulletPoint5 : Easy to install and to use
ExternallyAssignedProductIdentifier : 5202036997193
ExternallyAssignedProductIdentifier1 : 0747607586659
ExternallyAssignedProductIdentifier2 : 747607586659
Horsepower : 2 watts
IncludedComponents : Cable
ItemName : STEPPERONLINE Nema 17 Closed Loop Stepper Motor 16Ncm/22.7oz.in with Magnetic Encoder 1000PPR(4000CPR)
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 5 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-motors
Manufacturer : STEPPERONLINE
Material : Metal
ModelName : gear
ModelNumber : SG350mm
NumberOfItems : 1
PartNumber : 17HS08-1004-ME1K
ProductDescription : This is the thinnest closed loop stepper motor we have, it only with 26mm thickness include encoder. The encoder is a magnetic encoder with 3 channels and 1000PPR(4000CPR) resolution. The biggest advantage for magnetic encoder is the size and cost, they are widely used in small space and higher cost performance.

Electrical Specification

*Manufacturer Part Number: 17HS08-1004-ME1K
*Number of phase: 2
*Step Angle: 1.8deg
*Holding Torque: 16Ncm(22.7oz.in)
*Rated Current/phase: 1.0A
*Phase Resistance: 3.7ohms± 10%
*Inductance: 4.5mH ± 20%(1KHz)

Physical Specification

*Frame Size: 42 x 42mm
*Body Length: 26mm
*Shaft Diameter: φ5mm
*Shaft Length: 20mm
*D-CUT Shaft Length: 16.5mm
*Lead Length: 500mm
*Weight: 0.25kg

Encoder Specification

*Output Circuit Type: Differential
*Encoder Type: Magnetic Incremental
*Encoder Resolution: 1000PPR(4000CPR)
*Output Signal Channels: 3 channels
*Supply Voltage Min: 3.3V
*Supply Voltage Max: 5.5V
*Output Current: 20mA
*Output High Voltage: 5V
*Output Low Voltage: 0.2V
*Output Frequency Max: 400kHZ


ProductSiteLaunchDate : 2023-07-24T06:33:14.543Z
Speed : 11 rpm
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 49201501
Voltage : 12 volts