Cart 2 india

Specification
Brand : STEPPERONLINE
BulletPoint1 : * High Torque Good Speed
BulletPoint2 : * 0.067° Step Angle Planetary Gearbox Ratio 26.85:1
BulletPoint3 : * NEMA-17 bipolar 4-wire with motor length 40mm
BulletPoint4 : * Rated current 1.68A & resistance 1.65ohms
BulletPoint5 : * Rated Speed 7rpm/Rated Torque 3Nm
ExternallyAssignedProductIdentifier1 : 701056553747
ExternallyAssignedProductIdentifier2 : 0701056553747
Horsepower : 1.68 watts
IncludedComponents : Motor
ItemName : STEPPERONLINE 27:1 Planetary Gearbox Nema 17 Stepper Motor 1.68A for DIY CNC Robot 3D Printer
ItemPackageDimensions_Height : 8.128 centimeters
ItemPackageDimensions_Length : 13.462 centimeters
ItemPackageDimensions_Width : 9.652 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-motors
Manufacturer : STEPPERONLINE
ModelName : gear
ModelNumber : 17HS15-1684S-PG27
NumberOfItems : 1
PartNumber : 17HS15-1684S-PG27
ProductDescription : This is popular geared Nema 17 stepper motor with a medium body and torque. It has an integrated planetary gearbox with a 26.85:1 gear ratio, the resolution reach 0.067deg step angle. It's a good solution in applications that need very low rotation speeds and/or lots of torque.

Electrical Specification

* Manufacturer Part Number: 17HS15-1684S-PG27
* Motor Type: Bipolar Stepper
* Step Angle: 0.067deg
* Holding Torque: 3Nm
* Rated Current/phase: 1.68A
* Phase Resistance: 1.65ohms
* Recommended Voltage: 12-24V
* Inductance : 3.2mH±20%(1KHz)

Gearbox Specifications

* Gearbox Type: Planetary
* Gear Ratio : 26.85:1
* Efficiency: 81%
* Backlash at No-load :1deg
* Max.Permissible Torque: 3Nm(425oz-in)
* Moment Permissible Torque: 5Nm(708oz-in)
* Shaft Maximum Axial Load: 50N
* Shaft Maximum Radial Load : 100N

Physical Specifications
* Frame Size: 42 x 42mm
* Motor Length: 40mm
* Gearbox Length: 35mm
* Shaft Diameter: 8mm
* Shaft Length: 20mm
* D-cut Length: 15mm
* Number of Leads: 4
* Lead Length: 500mm
* Weight: 510g

Connection:

Black(A+), Green(A-), Red(B+), Blue(B-)

Warning:

Make sure the motor connect to a constant current or chopper drive controller before you test motor.
Connecting the motor directly to a power supply will destroy the motor.
ProductSiteLaunchDate : 2015-04-18T02:06:54.864Z
Speed : 7 rpm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 26111500
Voltage : 24 volts