Cart 2 india

Specification
Brand : RATTMMOTOR
BulletPoint : The Thinnest Nema 17 Closed Loop Steper Motor
BulletPoint1 : 【23HS8430 Motor Parameter】Phase: 2 Phase; Step Angle: 1.8 degree; Frame Size: 57x57x76mm; Shaft Diameter: 8mm; Holding Torque: 180N.cm (270Oz-in); Phase Resistance: 1ohms; Rated Current/phase: 3A; Inductance: 3.5mH+/-20%(1KHz).
BulletPoint2 : 【Excellent Performance】It has high torque, the stepper motor's power is 15%-20% higher than conventional motors. The circuit board inside the bipolar motor has been updated to ensure the stability of the motor structure and achieve the best uniform rotation.
BulletPoint3 : 【Advanced Technology】The motor coils are made of pure copper enamelled coils, built by advanced winding technology, with evenly distributed copper wires, not easy to get hot or burn, lower temperature rise of the motor, no deformation and noise for a long time.
BulletPoint4 : 【High Torque 】High quality motor steel, low self-induced reactance in the bearings, good responsiveness, direct linkage to the load at low speeds at near blocked speeds, without gear reduction.
BulletPoint5 : 【Low Noise 】The stepper motor is housed in a high strength metal casing, which is robust and durable, with frosted metal side walls for increased friction.
ExternallyAssignedProductIdentifier : 5202036997193
ExternallyAssignedProductIdentifier1 : 754193411838
ExternallyAssignedProductIdentifier2 : 0754193411838
Horsepower : 200 ounces
IncludedComponents : Nema 23 Closed Loop Stepper Motor Kit
ItemName : RATTMMOTOR Nema23 Stepper Motor 23HS8430 Single Shaft 57mm×57mm×76mm Stepper Motor 180N.cm 270Oz-in 1.8° 3A 4 Lead Wire for CNC Router Milling Engraving Machine
ItemPackageDimensions_Height : 22.9108 centimeters
ItemPackageDimensions_Length : 8.3058 centimeters
ItemPackageDimensions_Width : 13.1064 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-motors
Manufacturer : RTM
Material : Alloy Steel
ModelName : 23HS8430
ModelNumber : 23HS8430
NumberOfItems : 1
PartNumber : 23HS8430-3P
ProductDescription : package Include:
1 × Nema23 stepper motor single shaft 23HS8430

Parameters:
Model: 23HS8430
Shaft: Single shaft
Front shaft: diameter is 8mm, length is 21mm
Phase: 2 Phase
Step angle: 1.8°±5%
Motor Size: 57*57*76mm
Voltage: 4.8V
Rated current: 3A/phase
Holding torque: 1.8Nm(270oz-in)
Resistance:1.6Ω±10%/phase
Inductance: 6.8mH±20%/phase
Detent torque: 6N.cm/Min
Rotor inertia: 440g.cm²
Insulation: B
Inductance: 3.5mH+/-20%(1KHz)

How to wiring the 4-lead wire:
Stepper motor's Red wire connects to driver's A+ port
Stepper motor's GREEN wire connects to driver's A- port
Stepper motor's YELLOW wire connect to driver's B+ port
Stepper motor's BLUE wire connect to driver's B- port

General Specification:
Step angle accuracy:+ - 5%(full step,not load)
Resistance accuracy: + - 10%
Inductance accuracy:+ - 20%
Temperature rise: 80deg Max(rated current,2 phase on)
Ambient temperature: 20deg-50deg
ProductSiteLaunchDate : 2023-05-04T08:42:48.409Z
Size : 57*57*76mm
Speed : 11 rpm
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 26111500
Voltage : 230 volts