Cart 2 india

Specification
Brand : kobeIeen
BulletPoint1 : ● When the LD06AJSA / temperature junction reaches about 135 ° C, the internal temperature setting of reduces the current so that the temperature of the LED junction will not rise . this feature allows users to maximize the use of the power handling ability of the chip, do not worry about the chip overheating and damage to the chip or external components.
BulletPoint2 : ● The LD06AJSA / also has the function of allowing the chip, which can the whole chip to limit the shutdown current consumption within 1uA.
BulletPoint3 : ● LD06AJSA / is a current regulation integrated circuit operating from an input of 2.8 to 6 , the constant output current can be set to 1.5A with an external resistor. the LD06AJSA / consists of high reference,amplifier, current. The power and current block significantly reduce the number of external components, which makes the LD06AJSA / for ideal for LED driver.
BulletPoint4 : ● When the pin is high, the input is greater than 2.8 , and is than the direct the required drop, LD06AJSA / normally operates to provide constant current from the PULLOBEE. The LD06AJSA / adopts temperature regulation instead of temperature for function, the temperature regulation can cause the LEVOU to be continuously in for case of high temperature or fall.
BulletPoint5 : ● The LD06AJSA / also adopts the current overload for block. When the current LED 1.9A approaches (Typical), the on the current block for starts the function to the current LED from increasing.
Color : Green
Department : Women
ExternallyAssignedProductIdentifier : 7552280652422
ImportDesignation : Made in the USA and Imported
IncludedComponents : No
ItemDisplayWeight : 0.02 pounds
ItemName : kobeIeen for 2.8-6V 30-1500MA 1.5A LED Driver Control Board Module Adjustable
ItemPackageDimensions_Height : 0.79 inches
ItemPackageDimensions_Length : 1.97 inches
ItemPackageDimensions_Width : 1.97 inches
ItemShape : Rectangular
ItemTypeKeyword : 3d-printer-interface-and-driver-modules
Manufacturer : kobeIeen
Material : PCB
ModelName : Aqxreight76sdqgm9xo
ModelNumber : 59MV553EWHA912F72
NumberOfItems : 1
NumberOfLithiumMetalCells : 1
PartNumber : kobeIeen
ProductDescription : Description:
LD06AJSA / is a current regulation integrated circuit operating from an input of 2.8 to 6 , the constant output current can be set to 1.5A with an external resistor. the LD06AJSA / consists of high reference , amplifier, current , . The power and current block significantly reduce the number of external components, which makes the LD06AJSA / for ideal for LED driver.
When the pin is high, the input is greater than 2.8 , and is than the direct the required drop, LD06AJSA / normally operates to provide constant current from the PULLOBEE. The LD06AJSA / adopts temperature regulation instead of temperature for function, the temperature regulation can cause the LEVOU to be continuously in for case of high temperature or fall. When the LD06AJSA / temperature junction reaches about 135 ° C, the internal temperature setting of reduces the current so that the temperature of the LED junction will not rise . this feature allows users to maximize the use of the power handling ability of the chip, do not worry about the chip overheating and damage to the chip or external components.
the frequency of the must be less than 2 KHz

Specifications:
Operating : for 2.8-6 ( for 3.3 3.7 4.5 5 6 LED Driver)
Output Current: 30-1500MA
output power: 9
Can 1-16 pcs 2.8-6 LEDs ( current does not 1.5A)
Current regulations: 1 through adjustable through control
Temperature Control Chip
Took more than Current
Operating Temperature

Retail Package
Package Includes:
1 LED Driver

ProductSiteLaunchDate : 2025-05-10T11:09:09.503Z
Size : 1.8x1cm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TargetGender : unisex
Theme : Fun
UnitCount : 1
UnspscCode : 53000000