Cart 2 india

Specification
Brand : JTLB
BulletPoint1 : The DRV8871 device is a brushed-DC motor driver for printers, appliances, industrial equipment, and other small machines.
BulletPoint2 : Two logic inputs control the H-bridge driver, which consists of four N-channel MOSFETs that can control motors bidirectionally with up to 3.6-A peak current.
BulletPoint3 : The inputs can be pulsewidth modulated (PWM) to control motor speed, using a choice of current-decay modes.
BulletPoint4 : The DRV8871 device has advanced currentregulation circuitry that does not use an analog voltage reference or external sense resistor.
BulletPoint5 : This novel solution uses a standard low-cost, low-power resistor to set the current threshold.
ExternallyAssignedProductIdentifier : 9178666270431
ItemName : JTLB DC Motor Driver Board DRV8871 BOB Drive Module 3.6A PWMControl Port for Printer Electric Appliance Industrial Equipment
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 8 centimeters
ItemPackageDimensions_Width : 6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-interface-and-driver-modules
ItemTypeName : Home & Kitchen
Manufacturer : JTLB
ModelName : JTLBmya5qxpf2e
ModelNumber : JTLBmya5qxpf2e
PartNumber : JTLBmya5qxpf2e
ProductDescription : 1. The DRV8871 device is a brushed-DC motor driver for printers, appliances, industrial equipment, and other small machines.
2. Two logic inputs control the H-bridge driver, which consists of four N-channel MOSFETs that can control motors bidirectionally with up to 3.6-A peak current.
3. The inputs can be pulsewidth modulated (PWM) to control motor speed, using a choice of current-decay modes.
4. The DRV8871 device has advanced currentregulation circuitry that does not use an analog voltage reference or external sense resistor.
5. This novel solution uses a standard low-cost, low-power resistor to set the current threshold.
6. The ability to limit current to a known level can significantly reduce the system power requirements and bulk capacitance needed to maintain stable voltage, especially for motor startup and stall conditions.
7. The device is fully protected from faults and short circuits, including undervoltage (UVLO), overcurrent (OCP), and overtemperature (TSD).
8. When the fault condition is removed, the device automatically resumes normal operation.

Spec:
Condition: % Brand NewItem Type: DC Motor Driver
Material: Metal
Color: BlackH-Bridge Motor Driver
Drives One DC Motor, One Winding of a Stepper Motor, or Other Loads
Wide 6.5-V to 45-V Operating Voltage
565-m? Typical RDS(on) (HS + LS)
3.6-A Peak Current Drive
PWM Control Interface
Current Regulation Without a Sense Resistor
Low-Power Sleep Mode
Small Package and Footprint:
8-Pin HSOP With PowerPAD
4.9 × 6 mm / 0.19 x 0.24in
Integrated Features:
VM Undervoltage Lockout (UVLO)
Overcurrent (OCP)
Thermal Shutdown (TSD)
Automatic Fault Recovery
Applications:
Printers
Appliances
Industrial Equipment
Other Mechatronic Applications

packing list:
1 x DC Motor
ProductSiteLaunchDate : 2024-03-29T06:31:08.628Z