Cart 2 india

Specification
Brand : YWBL-WH
BulletPoint1 : Use removable A4988 or DRV8825 compatible stepping driver
BulletPoint2 : BASIC SPECIFICATIONS: PWM spindle and direction pin, 4 shaft support (X, Y, Z, A - you can copy X, Y, Z or use pin D12 and D13 customize firmware perform complete shaft 4).
BulletPoint3 : Compatible with GRBL 0.8. Open?source firmware , converting G code command into stepping
BulletPoint4 : The extension board can be used for engraving machine or 3D printer driver
BulletPoint5 : OPERATION TIPS: This CNC Expansion Board is a set of disassembled part, and you need basic soldering skills to solder them together.
ExternallyAssignedProductIdentifier1 : 0739459449480
ExternallyAssignedProductIdentifier2 : 739459449480
ItemName : CNC Expansion Board, CNC V3 Engraving Machine Expansion Board and 4Pcs A4988 Stepper Motor Driver, 3D Printer Interface & Driver Modules
ItemPackageDimensions_Height : 4 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 8 centimeters
ItemTypeKeyword : 3d-printer-interface-and-driver-modules
Manufacturer : YWBL-WH
Material : plastic
ModelName : YWBL-WHhomwpunvbs
ModelNumber : YWBL-WHhomwpunvbs
NumberOfItems : 1
PartNumber : YWBL-WHhomwpunvbs
ProductDescription : Specifications:
CNC Expansion Board:
Version: V3.0
Color: Red
Size: 68 x 53 x 18mm / 2.67 x 2.08 x 0.7
Voltage: DC 12V to 36V (only DRV8825 driver can handle up to 36V, so please consider voltage for power supply)
4pcs A4988 Driver:
Color: Red
Size: 20 x 15mm / 0.78 x 0.59
Thermal Shutdown Circuit: Yes
Cross Current : Yes
Ground Fault : Yes
Short Circuit : Yes
Compatible Logic Voltage: 3.3V and 5V
Five Step Modes: Full, 1/2, 1/4, 1/8 and 1/16
Mix with slow current attenuation model.
Internal UVLO and low RDS (on) output.
Automatic current attenuation mode Detection/Select.
Phase-in rectifier, low power consumption.
Warning: Connecting or disconnecting stepping motor while driver is powered on might damage driver.
4pcs Heat Sinks:
Size: 8 x 8mm / 0.31 x 0.31
Color: White

Package Includes:
1 x V3 Extension Board
4 x Drivers
4 x Heat Sinks
ProductSiteLaunchDate : 2023-12-23T00:00:00.000Z
UnitCount : 1