Cart 2 india

Specification
Brand : YJYGR
BulletPoint1 : The master program no need to modification, plug and play, support Marlin, Repetier, Smoothieware firmware.
BulletPoint2 : Support continued printing when power off, power off save.
BulletPoint3 : Support no material detection.
BulletPoint4 : Boot logo and all buttons and other interface can be designed.
BulletPoint5 : We are a professional Amazon store. If you have any questions, you can contact us at any time. We sincerely create a good buying experience for every customer who comes to each store.
Color : Multiple Colors
CurrentRating : 10 amps
ExternallyAssignedProductIdentifier : 8691415902533
ItemName : YJYGR MKS-GEN L Integrated Controller Mainboard V1.0 + 3.2 Inch MKS-TFT32 Full Color LCD Touch Screen Support Power Resume Print BT APP for 3D Printer Driver Modules Driver Board
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-controllers
Manufacturer : YJYGR
Material : Composite
ModelNumber : 58e4c5a71afb954bc30fe15a6d61bc
MountingType : Surface Mount
NumberOfItems : 1
OperatingVoltage : 250 volts
OperationMode : Automatic
PartNumber : 652573979
ProductDescription : MKS-Gen L

Overview:

Aiming at the problems exist on the open sourced controller board such as Ramps 1.4, the developers in Makerbase specially optimize and develop a product, MKS-Gen L, which provides more flexible choices for users.

Features:

1. 2560 and Ramps 1.4 are integrated in the board, which avoids the complicated connectors.

2. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100 and LV8729, available to change the stepper drivers and motors as users like.

3. Reserve external driver signal, available to connect external high-current driver to drive the 57 and 86 stepper motors.

4. Use high-quality MOSFET, better cooling and more stable.

5. Use specific power chip, support 12V-24V power input, and resolve the problems of chip heating and power shortage.

6. Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing.

7. Use CH340 serial port chip, more easily install the drive than 16U2.

8. Run Marlin firmware, the configuration is completely same as Ramps 1.4, and available to directly replace the Ramps 1.4.

9. Support Ramps 1.4, 2004LCD,12864LCD, TFT28 and TFT32.

10. Available to input 24V, the heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats.

11. X axis, Y axis and Z axis with different color terminal controls the stepper motors and endstops, which is convenient to wire.

12. Plug the stepper drivers according to the different color terminals which decreases the probability of reverse and prevents the controller board damage.

MKS-TFT32 Touch Screen
ProductSiteLaunchDate : 2021-08-31T02:19:23.111Z
Size : Small
Style : Printed
SwitchType1 : Limit Switch
SwitchType2 : Temperature Switch
UnitCount : 1
UnspscCode : 52140000