Cart 2 india

Specification
Brand : Apem
BulletPoint1 : ✅Pack of 6 : Comes in 6PCS BTT TMC2209 stepper motor drivers and heatsink. Thanks to the StealthChop2, TMC2209 driver serves as ultra-quiet stepper motor driver with with a continuous current of up to 2.0A (with peaks of 2.8A). Voltage ranges from 4.75V to the maximun output of 28V.
BulletPoint2 : ✅Ultra-Silent: BIGTREETECH TMC2209 stepper motor driver adopts stealthChop2 silent technology, high-precision chopping algorithm, which reduces the motor noise to a silent state, ensuring ultra-quiet, highest efficiency and best motor torque during printing.. And the flexible microPlyer interpolation unit provides up to 256 subdivisions, which can achieve perfect sinusoidal control even in systems with limited pulse frequency.
BulletPoint3 : ✅More Cost-effective: BIGTREETECH TMC2209 V1.3 stepper motor driver is compatible with existing 3D printer electronics on the market, eliminating the expensive cost of redesigning. It can perfectly replace the original TMC2100 A4988 DRV8825 LV8729, with lower calorific value.
BulletPoint4 : ✅Terrific Performances: Featured with RDSon value of 0.2A, BTT TMC2209 uart stepper drivers have lower resistance conducting output drivers, which provides them with less power dissipation and higher current. The Spreadcycle provides high-precision cycle-by-cycle current control for highest dynamic movements.
BulletPoint5 : ✅After-sales Service: 1-Year warranty is 100% guaranteed. If you have any questions about this 6PCS TMC2209 V1.3 stepper driver, you can contact us at any time through Amazon, and we will give you a satisfactory answer.
Color : Black & Silver
CurrentRating : 8 amps
ExternallyAssignedProductIdentifier : 6013130810832
ExternallyAssignedProductIdentifier1 : 0768249123576
ExternallyAssignedProductIdentifier2 : 768249123576
Horsepower : 0.11 watts
IncludedComponents : BIGTREETECH TMC2209 V1.3
ItemName : RELAY DPDT 8A 12VDC PC MOUNTABLE LOW PROFILE
ItemPackageDimensions_Height : 9.7 centimeters
ItemPackageDimensions_Length : 3.5 centimeters
ItemPackageDimensions_Width : 6 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-controllers
ItemTypeName : Home & Kitchen
Manufacturer : NTE
Material : PCB
MaximumSwitchingVoltage : 12 volts
ModelName : BIGTREETECH TMC2209 V1.3
ModelNumber : R49-11D8-12
NumberOfBoxes : 1
NumberOfItems : 1
OperationMode : Automatic
PartNumber : R49-11D8-12
ProductDescription :

Product Description:

Material: PCB

Mode: DIR/STEP,UART

Motor Voltage: 5.5-28V

Logic Voltage: 3.3-5V

RSense: 0.11 Ohm

Current: 2A (Peak 2.8A)

Microsteps: 256 Subdivision

Product Features:

Avoid Losing Steps and Jittering

Immersion Gold Proxess, The Better Antioxidant

SpreadCycle: The motor controlled by the PWM chopper mode operated more smoothly and without Jitter

The TMC2209 can effectively avoid problem such as running deviation losing step and fault caused by the overlode of the chip

Warm Notice

When the driver is inserted into motherboard, plaese pay attention to see the direction of the drive, can not be inserted in reverse, to prevent the drive from burning.

Be sure to do a good job before driving heat dissipation work(heat sink+fan), to prevent the drive is not working properly.

ProductSiteLaunchDate : 2012-08-07T20:37:33.332Z
Size : Creality K1 Nozzle Kit
Style : 6Pcs TMC2209 V1.3
SupplierDeclaredDgHzRegulation : not_applicable
Voltage : 5.5 volts