Cart 2 india

Specification
AgeRangeDescription : adult
Brand : ZSYTF
BulletPoint1 : Jumpers- set microsteps for stepper (Some such as DRV8825, can execute -1/32 microsteps)The stepper motor can be connected- to a 4pin-Molex connector or welded in place
BulletPoint2 : 4-axis support (X, Y, Z, a can copy X, Y, Z or create a complete 4-axis firmware- using pins- D12 and D13); 2 endpoints per (total of 6)
BulletPoint3 : Operates on 12-36V DC-power. (Currently, only the Pololu-DRV8825 driver can handle voltages up to 36V, so please consider the working voltage- when supplying power to the circuit board.)
BulletPoint4 : V3.0- GRBL 0.8 -c compatible. (Open source firmware- running on UNO- can convert G-code-commands into step signals
BulletPoint5 : Adopting a movable Pololu- A4988 compatible stepper driver. (A4988, DRV8825, and others)
BulletPoint6 : Size: 4 (ID) * 9 (OD) * 7 (Width) T4
Color : Blue
ExternallyAssignedProductIdentifier : 7598400147614
ItemName : ZSYTF Professional 3D Printer Kit CNC-Shield Expansion Board V3.0 Engraving Board A4988 + Stepper Motor Driver Nema17 CNC-Shield V3 Engraving Machine + A4988 Motor Driver Kit + Stepper Motor Nema17
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-accessories
Manufacturer : ZSYTF
ModelName : 9875
ModelNumber : 9875
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : ZSYTF
ProductDescription : Professional 3D Printer Kit CNC-Shield Expansion Board V3.0 Engraving Board A4988 + Stepper Motor Driver Nema17 CNC-Shield V3 Engraving Machine + A4988 Motor Driver Kit + Stepper Motor Nema17 17HS4401S Step Motor With WireFeatures:Stable performance A4988 Driver Chip is low power consumption and will not be too hot during use. The performance is more stable than chip V3.0- GRBL 0.8 -c compatible. (Open source firmware- running on UNO- can convert G-code-commands into step signals4-axis support (X, Y, Z, a can copy X, Y, Z or create a complete 4-axis firmware- using pins- D12 and D13); 2 endpoints per (total of 6)Adopting a movable Pololu- A4988 compatible stepper driver. (A4988, DRV8825, and others)Jumpers- set microsteps for stepper (Some such as DRV8825, can execute -1/32 microsteps)The stepper motor can be connected- to a 4pin-Molex connector or welded in placeOperates on 12-36V DC-power. (Currently, only the Pololu-DRV8825 driver can handle voltages up to 36V, so please consider the working voltage- when supplying power to the circuit board.)Specifications:Item: 3D Printer Accessories Kitwith: V3+UNOR3 +A4988 Driver+ Stepper MotorPower: DC12-36VPackage Includes:1 x CNC-Shield V3.0-1 x UNOR3 Board4 x Motor Wires4 x A4988 Drive 4 x 17HS4401S Stepper Motor1x USB CableNote:Please allow 1-2cm errors due to manual measurement,please make sure that you do not mind before you order.Due to the difference between different monitors, the picture may not reflect the actual color of the item.
ProductSiteLaunchDate : 2024-01-03T11:59:36.000Z
Size : 11.5cmx5.7cm
UnitCount : 1