Cart 2 india

Specification
Brand : KOYOFEI
BulletPoint1 : The light transmittance of the tempered film is 95%, which will not affect the light of the monochromatic screen to cure the resin in the resin tank through the tempered film.
BulletPoint2 : With good protection, the tempered film can not only protect the monochrome screen from being scratched by sharp objects in daily use, but also prevent the resin from leaking and polluting the screen from the damage of the release film.
BulletPoint3 : Compatible Models: 10.1 inch tempered glass screen protector is compatible with Elegoo Saturn 2, Saturn 8K, Photon M3 Premium and Sonic Mighty 8K. It comes with tool kit and manual, please read the introduction of the manual before installation.
BulletPoint4 : Easy to use, the back of the tempered film is covered with a protective film. Please keep the screen clean before use, then remove the back protective film and install the tempered film on the monochrome screen. Use a plastic scraper to avoid air bubbles. After the installation is completed, please use cleaning fluid and The non-woven fabric wipes the tempered film clean.
BulletPoint5 : Small Tips:The tempered film has a thickness of 0.33mm. In order to avoid printing problems, it is recommended to level the 3D printer again after installing the tempered film.
Color : Clear Yellow
CompatibleDevices : Printer
ExternallyAssignedProductIdentifier : 7462381411906
IncludedComponents : No
ItemHardness : 9H
ItemName : KOYOFEI 3PCS Tempered Glass Screen Protector for 10.1'' LCD 3D Printer, High Light Transmittance Protective Film for Elegoo Saturn 2, Saturn 8K, Sonic Mighty 8K, M3 Premium Resin 3D Printer
ItemPackageDimensions_Height : 28.2956 centimeters
ItemPackageDimensions_Length : 1.1938 centimeters
ItemPackageDimensions_Width : 21.6916 centimeters
ItemTypeKeyword : 3d-printer-accessories
Manufacturer : KOYOFEI
Material : Tempered Glass
ModelNumber : Tgoonz09xo2qvh1-11
NumberOfBoxes : 1
NumberOfItems : 3
PartNumber : KYF-3D-163
ProductDescription :

10.1 Inch Monochrome Screen Tempered Film for Elegoo Saturn 2, Saturn 8K, Photon M3 Premium, Sonic Mighty 8K Resin 3D Printer.

Installation instructions:

Installation of the tempered glass screen protector

1.Tear off the dirty screen protector and clean the curing screen with tool set.

A. Wipe the screen with alcohol prep pad

B. Wipe the screen with a dry cloth

C. Use dust absorbers to remove fine dust.

2. Peel off the back of the screen protector, align the protector to the edge of the screen and stick it from one end to the other. Bring the installation carefully without air bubbles.

3. Clean the front of the screen protector with tool kit.

ProductSiteLaunchDate : 2023-02-16T03:41:40.056Z
ScreenSurfaceDescription : Matte
Size : 10.1 inch
Style : Springs
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1