Cart 2 india

Specification
Brand : DiGiYes
BulletPoint1 : -- This Bowden tube is reinforced with a proprietary blend of high-performance additives that can withstand higher temperatures than any other tubes, making it ideal for printing specialty filaments such as ABS, nylon, and polycarbonate. This PTFE tube can keep working at temperatures up to 340 degrees Celsius.
BulletPoint2 : -- Tube length: 1 meter, inner diameter: 2mm, outer diameter: 4mm. The optimal inner diameter size is designed to reduce "wiggle room" or bending in the tube.
BulletPoint3 : -- Two KJH04-M6 extruder joints and two hot end PC4-M10 joints are suitable for PTFE tube with an inner diameter of 2mm and an outer diameter of 4mm. H59 copper material, with galvanized surface treatment.
BulletPoint4 : -- 1 tube cutter that can cut both sides of the feed pipe flat to prevent any malfunctions or heat spread during the feeding and retraction process. It can also cut various PTFE pipes and PE pipes.
BulletPoint5 : -- Designed for 1.75mm filament, tubing has extremely accurate inner & outer diameters, and filament loads smoothly into the hotend with as little room for error as possible between the extruder and the hotend.
ExternallyAssignedProductIdentifier : 4894832006158
ItemName : DiGiYes Bowden PTFE Tubing 1M Fit for Ender 3 Ender 5 / CR-10 CR-20 Series / 1.75mm Filament with Tube Cutter, 2 X KJH04-M6, and 2 X PC4-M10 Joints, 3D Printer Extruder Fitting
ItemPackageDimensions_Height : 1.18 inches
ItemPackageDimensions_Length : 6.1 inches
ItemPackageDimensions_Width : 4.13 inches
ItemTypeKeyword : 3d-printer-accessories
Manufacturer : DiGiYes
ModelNumber : BU|777
NumberOfItems : 6
PartNumber : DPA_C06
ProductDescription : Parameter Information:
Material: PTFE, Copper
Outside Diameter: 4mm
Inside Diameter: 2mm
Place of Application:
- Fit for Creality Ender 3 Ender 5 CR-10 CR-20 series and other similar 3D printers.
Package Include:
1 x 1m PTFE Tube
2 x KJH04-M6 Joints
2 x PC4-M10 Joints
1 x Tube Cutter
ProductSiteLaunchDate : 2023-04-24T07:22:40.632Z
SupplierDeclaredDgHzRegulation : not_applicable