Cart 2 india

Specification
AgeRangeDescription : adult
Brand : atcdfuw
BulletPoint1 : Suitable for Ender-3 / Ender-3s / Ender-3 / 5 / / Cr-10S / 10S4 / 10S5 / Cr-20 / Cr-20 for 2/Kossel/BLV/ Voron and other 3D printers.
BulletPoint2 : The automatic bed leveling sensor makes the leveling of the hot bed easier, it can accurately measure the inclination of the bed surface.
BulletPoint3 : You can get the position of the by touching the on the heating bed, and then adjust the Z-AXIS height to compensate during the printing process. Printing can be achieved even if the platform is not flat.
BulletPoint4 : Using progressively designed solenoids and sensors, is integrated in such a simple structure. In order to make it more humane and bring you a more pleasant printing experience.
BulletPoint5 : It can work with almost any kind of bed material, such as glass, metal, etc.
BulletPoint6 : Size: 4 (ID) * 9 (OD) * 7 (Width) T4
Color : Blue
ExternallyAssignedProductIdentifier : 7447533605679
ItemName : 3D Printer BlTouch Auto Bed Leveling Sensor Kit for 3/ 3s / 3 V2 Hot Bed Printing Leveling Sensor 3D Printer Sensor Kit
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3d-printer-accessories
Manufacturer : atcdfuw
Material : Polyester
ModelName : 9875
ModelNumber : 9875
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : atcdfuw
ProductDescription : 3D Printer blTouch Auto Bed Leveling Sensor Kit for 3/ 3s / 3 V2 Hot Bed Printing leveling sensor 3d printer sensor kit
Features:
brand new and
It can work with almost any kind of bed material, such as glass, metal, etc.
Suitable for Ender-3 / Ender-3s / Ender-3 / 5 / / Cr-10S / 10S4 / 10S5 / Cr-20 / Cr-20 for 2/Kossel/BLV/ Voron and other 3D printers.
The automatic bed leveling sensor makes the leveling of the hot bed easier, it can accurately measure the inclination of the bed surface.
Using progressively designed solenoids and sensors, is integrated in such a simple structure. In order to make it more humane and bring you a more pleasant printing experience.
You can get the position of the by touching the on the heating bed, and then adjust the Z-AXIS height to compensate during the printing process. Printing can be achieved even if the platform is not flat.

Specifications:
Name: Automatic Leveling Sensor
Color: White Translucent
Voltage: 5V
Current: 15mA
Current (for Value): 300mA
for Shell Material: PC
Cable Length approx : Short Line: 200mm/7.87in ; Long Line: 1000mm/39.4in
Wiring: 3pin: Green: -gnd;
ProductSiteLaunchDate : 2024-03-28T03:40:08.000Z
Size : 11.5cmx5.7cm
Style : 13.5" Large Blackout and Silicon Pad
UnitCount : 1
Voltage : 5 volts