YELUFT 2pcs 3.7V 1000mAh Lithium Polymer Battery 1S 1C Rechargeable Battery with Protection Board, Insulated Rubber Tape and Micro JST 1.25 Plug for Arduino ESP32 Development Board

Customer rating 4.6 stars

Imported from USA | Ships in 10 working days

5% additional discount on UPI | Cash On Delivery available

1

₹5790 -36% ₹3700/-

The price at cart2india.com is inclusive of custom duties, GST, freight forwarding and other charges.

Free Shipping across India. Powered by BlueDart

Product Information


Specification
BatteriesIncluded : 1
BatteriesRequired : 1
Brand : YELUFT
BulletPoint1 : Charging Method: The recommended charging current is 0.2A, the maximum is not more than 1A. The discharge current is recommended 0.55A, and the maximum is not more than 3A
BulletPoint2 : Overcharge Protection: When charging the battery, when the voltage reaches the highest battery voltage (4.2V), the protection board will automatically power off and shut down, indicating that it will not continue to charge when fully charged, form an overcharge protection
BulletPoint3 : Over-discharge Protection: When the battery is about to run out and the voltage is as low as 3.0V, the protection board will also be turned off and can no longer be discharged, forming an over-discharge protection effect
BulletPoint4 : Short Circuit Protection: When an accidental short circuit occurs, the protection board will automatically shut down within a few milliseconds and will not be powered on again. Note that the cell is short-circuited (not through the protection board). The protection board will also fail due to continuous high current, or the components are heated and damaged
BulletPoint5 : Note: The battery overcurrent protection is not a panacea, do not continue to charge and discharge the current and voltage with a large current beyond the range, otherwise the protection board will be damaged and invalid
BulletPoint6 : Storage: When the battery is not used for a long time, it may be in a certain over-discharge state due to its self-discharge characteristics. To prevent over-discharge, the battery should be charged regularly to maintain its voltage between 3.7V and 3.9V; over-discharge will lead to loss of battery performance and battery function
BulletPoint7 : In view of the original design, we have added a new product which is the battery extension cable, it can be extended and connected between the battery and the port inside the battery compartment. The purpose is to increase the length from the port of battery compartment so that the battery can be charged without pulling Battery Cable Port out from this little case manually.
BulletPoint8 : In addition, our sales set is also packaged with an USB charging cable. When the battery extension cable is removed, and connect this USB cable with Battery’s Cable,so that you can charge it,Lightly and Directly.
Color : Green
CompatibleDevices : Telephone
CompatibleDevices1 : Mouse
CompatibleDevices2 : Monitors
CompatibleDevices3 : Notebook
CompatibleDevices4 : Keyboard
CompatibleDevices5 : Camera
CompatiblePhoneModels1 : AKAI EWI 5000
CompatiblePhoneModels2 : AKAI EWI SOLO
ContainsBatteryOrCell : battery
Hazmat1 : LITHIUM ION BATTERIES
Hazmat10 : DE_SmallLithiumIonBatteryStandalone
Hazmat11 : EG_SmallLithiumIonBatteryStandalone
Hazmat12 : ES_SmallLithiumIonBatteryStandalone
Hazmat13 : FR_SmallLithiumIonBatteryStandalone
Hazmat14 : GB_SmallLithiumIonBatteryStandalone
Hazmat15 : IE_SmallLithiumIonBatteryStandalone
Hazmat16 : IN_SmallLithiumIonBatteryStandalone
Hazmat17 : IT_SmallLithiumIonBatteryStandalone
Hazmat18 : JP_SmallLithiumIonBatteryStandalone
Hazmat19 : MX_SmallLithiumIonBatteryStandalone
Hazmat2 : UN3480
Hazmat20 : NL_SmallLithiumIonBatteryStandalone
Hazmat21 : PL_SmallLithiumIonBatteryStandalone
Hazmat22 : SA_SmallLithiumIonBatteryStandalone
Hazmat23 : SE_SmallLithiumIonBatteryStandalone
Hazmat24 : SG_SmallLithiumIonBatteryStandalone
Hazmat25 : TR_SmallLithiumIonBatteryStandalone
Hazmat26 : US_SmallLithiumIonBatteryStandalone
Hazmat27 : ZA_SmallLithiumIonBatteryStandalone
Hazmat28 : 9
Hazmat3 : II
Hazmat4 : AE_SmallLithiumIonBatteryStandalone
Hazmat5 : AU_SmallLithiumIonBatteryStandalone
Hazmat6 : BE_SmallLithiumIonBatteryStandalone
Hazmat7 : BR_SmallLithiumIonBatteryStandalone
Hazmat8 : CA_SmallLithiumIonBatteryStandalone
Hazmat9 : CN_SmallLithiumIonBatteryStandalone
IncludedComponents : Battery, extension cable, USB charging cable
ItemName : YELUFT 2pcs 3.7V 1000mAh Lithium Polymer Battery 1S 1C Rechargeable Battery with Protection Board, Insulated Rubber Tape and Micro JST 1.25 Plug for Arduino ESP32 Development Board
ItemPackageDimensions_Height : 7 centimeters
ItemPackageDimensions_Length : 4.3 centimeters
ItemPackageDimensions_Width : 3 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : 3.7v-batteries
Manufacturer : YELUFT
ModelName : EB-BG530BBC
ModelNumber : EB-BG530BBC
NumberOfItems : 2
NumberOfLithiumIonCells : 1
PartNumber : 505080
ProductDescription : Specification:
Standard Voltage: 3.7V
Rated Capacity: 1000mAh
Weight: About 17g
Size: 44*26*9(mm)
Working Current: 1.5A
Overcurrent protection: 2~3A
Overcharge limit pressure: 4.25±0.05V
Over-voltage limit pressure: 2.45±0.30V
Charge current time: Standard Charging: 0.2C (8 hours); Fast charging: 0.5C (2.5 hours)
The maximum charging current: 0.5C
Continuous Discharge Current: 0.5C
The maximum discharge current: 1C
End-off voltage: 2.75V/pcs
Allowable charging temperature: 0℃ ~ +45 ℃
Allowable discharge temperature: -10 ~ +60 ℃
Allowable storage temperature: -10 ~ +40 ℃( within 3 months); -10 ~ +30 ℃ ( within 6 months)

Standard Charging Method:
Charging this battery to 4.25V at 0.2C constant current, then charge the battery at a constant voltage of 4.2V till it's charging current≤ 0.05C

Note:
1. The maximum operating current of this battery is only about 1A, can not be used for unmanned aerial vehicles, model aircraft or power tools and other products that require high current
2. This battery interface is JST 1.25 pitch male, it can be matched with some ESP32 Development Board that it come with Female JST 1.25 mm connectors

Package Content:
2 * 1000mAh 3.7V Lithium Polymer Rechargeable Battery
ProductSiteLaunchDate : 2025-03-13T08:39:09.769Z
RecommendedUsesForProduct : ESP32 Development Board Whose Plug is SH1.25-2
RecommendedUsesForProduct1 : Raspberry Pi UPS Board
RecommendedUsesForProduct2 : WisBlock Meshtastic Starter Kit
Reusability : Rechargeable
Size : 2
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 26111700
Voltage : 3.7 volts
WarrantyDescription : No Warranty

Questions & Answers

Have a question? Ask experts

?
No question found

Ratings & Review

Rating Breakdown (average)

5*
5
4*
4
3*
0
2*
0
1*
0

Read all 9 customer reviews

Very useful and nicely packaged.

Totally worth every penny.

Nice features and easy to handle.

Meets expectations, good buy.

Will definitely recommend to others.

Flawless in both function and design.

IÕm extremely impressed with this item.

Impressive quality and durability.

Everything about this is perfect.

Have an opinion on this page? Let's hear it.