Cart 2 india

Specification
Amperage : 3 amps
AutomotiveFitType : vehicle_specific_fit
BatteriesIncluded : 1
BatteriesRequired : 1
BatteryInstallationDeviceType : not_installed
Brand : MakerFocus
BulletPoint1 : Reversed Polarity: These 10000mAh battery is designed with special reverse polarity (positive and negative terminals are in opposite positions to those of conventional batteries), so please be sure to check the direction of the device interface before installation to avoid damage due to the opposite connection. Please recognize the “+” and “-” markings on the battery side when installing
BulletPoint2 : Standard Charging Method: Charging this battery to 4.25V at 0.2C constant current, then charge the battery at a constant voltage of 4.2V till it's charging current≦0.05C
BulletPoint3 : Application: 1S 10000mAh lipo batteries can be used for Raspberry Pi UPS board whose plug PH2.0
BulletPoint4 : Specification: Material: Lithium Rechargeable Battery, Voltage: 3.7V, Capacity: 10000mAh, Discharge: 1C, Plug: PH2.0
BulletPoint5 : Safety: Passed the MSDS test and the UN 38.3 test recognized by the United Nations to ensure that the chemical substances are not exceeded, and the use is safe and reliable
BulletPoint6 : Note: The maximum operating current of this 3.7V 10000mAh lipo battery is only about 3A, can not be used for unmanned aerial vehicles, model aircraft or power tools and other products that require high current
Color : Yellow
CompatibilityOptions1 : rv battery
CompatibilityOptions2 : trolling motor
CompatibleDevices : Solar
CompatibleDevices1 : Solar
CompatibleDevices2 : Torch
CompatibleDevices3 : for Sennheiser M3IETW
CompatiblePhoneModels : Flashlight
CompatibleWithVehicleType : Passenger Car
CompatibleWithVehicleType1 : RV
CompatibleWithVehicleType2 : Boat
ContainsBatteryOrCell : battery
Edition : 2 Pack
ExternallyAssignedProductIdentifier1 : 613464789086
ExternallyAssignedProductIdentifier2 : 0613464789086
HasReplaceableBattery : 1
Hazmat : 9
Hazmat1 : LITHIUM ION BATTERIES
Hazmat10 : DE_SmallLithiumIonBatteryStandalone
Hazmat11 : EG_SmallLithiumIonBatteryStandalone
Hazmat12 : ES_SmallLithiumIonBatteryStandalone
Hazmat13 : FR_SmallLithiumIonBatteryStandalone
Hazmat14 : GB_SmallLithiumIonBatteryStandalone
Hazmat15 : IE_SmallLithiumIonBatteryStandalone
Hazmat16 : IN_SmallLithiumIonBatteryStandalone
Hazmat17 : IT_SmallLithiumIonBatteryStandalone
Hazmat18 : JP_SmallLithiumIonBatteryStandalone
Hazmat19 : MX_SmallLithiumIonBatteryStandalone
Hazmat2 : UN3480
Hazmat20 : NL_SmallLithiumIonBatteryStandalone
Hazmat21 : PL_SmallLithiumIonBatteryStandalone
Hazmat22 : SA_SmallLithiumIonBatteryStandalone
Hazmat23 : SE_SmallLithiumIonBatteryStandalone
Hazmat24 : SG_SmallLithiumIonBatteryStandalone
Hazmat25 : TR_SmallLithiumIonBatteryStandalone
Hazmat26 : US_SmallLithiumIonBatteryStandalone
Hazmat27 : ZA_SmallLithiumIonBatteryStandalone
Hazmat28 : 9
Hazmat3 : II
Hazmat4 : AE_SmallLithiumIonBatteryStandalone
Hazmat5 : AU_SmallLithiumIonBatteryStandalone
Hazmat6 : BE_SmallLithiumIonBatteryStandalone
Hazmat7 : BR_SmallLithiumIonBatteryStandalone
Hazmat8 : CA_SmallLithiumIonBatteryStandalone
Hazmat9 : CN_SmallLithiumIonBatteryStandalone
IncludedComponents : 1 * 3.7V 10000mAh 37Wh Battery with PH2.0 Plug
IsBatteryNonSpillable : 1
ItemName : MakerFocus 1pcs 3.7V 10000mAh Lithium Polymer Rechargeable Battery with Integrated Protective Board, Insulation Coating and PH2.0 Plug for Raspberry Pi Battery Pack UPS and Other
ItemPackageDimensions_Height : 13.3096 centimeters
ItemPackageDimensions_Length : 2.8956 centimeters
ItemPackageDimensions_Width : 8.1026 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangle
ItemTypeKeyword : 3.7v-batteries
Manufacturer : MakerFocus
Material : ABS
ModelName : Lipo Battery
ModelNumber : 335013-EM-RLI-026-1.1
NonLithiumBatteryPackaging : batteries_only
NumberOfCells : 4
NumberOfItems : 1
NumberOfLithiumIonCells : 1
NumberOfLithiumMetalCells : 4
PackageLevel : unit
PartNumber : TB-CE00200768
PartTypeId : 2476
Pattern : Solid
ProductDescription : This 3.7V Lipo Battery 10000mAh Lithium Rechargeable Battery 's Connector is PH2.0, it can be used for Raspberry Pi UPS board whose plug is PH2.0 and other project equipment with PH2.0 port.

Specification:
Standard Voltage: 3.7V
Capacity: 10000mAh
Max Working Current: 3A
Dimensions(±2mm): 115 * 65 *8.8mm / 4.52 * 2.56 * 0.35inch(L*W*H)
Overcurrent Protection: about 1.8-2.1A
Type of Connector: PH2.0
Weight: 155g

Standard Charging Method:
Charging this battery to 4.25V at 0.2C constant current, then charge the battery at a constant voltage of 4.2V till it's charging current≤ 0.05C.

Packing List:
1 * 10000mAh 3.7V 9065115 Lithium Rechargeable Battery
ProductSiteLaunchDate : 2021-04-30T09:57:08.825Z
RecommendedUsesForProduct : Led Flashlights
RecommendedUsesForProduct1 : Raspberry Pi UPS Board
RecommendedUsesForProduct2 : RAKwireless WisBlock Meshtastic Starter Kit
Reusability : Rechargeable
ShipsGlobally : 1
Size : 1
Style : 5AH
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TerminalType : Screw Terminal
UnitCount : 1
UnspscCode : 26111701
Voltage : 3.7 volts
WarrantyDescription : 1 Year
Wattage : 800 milliamp_hours