Cart 2 india

Specification
Brand : Laguna
BulletPoint1 : Waterproof: The plaster is waterproof and can be used for mold making and casting.
BulletPoint2 : Ideal for Latex Molds: The plaster is ideal for creating molds from latex rubber.
BulletPoint3 : High Tensile Strength: The plaster has a tensile strength of 50 pounds, making it strong and durable.
BulletPoint4 : White Color: The plaster comes in a white color that matches well with most mold materials.
BulletPoint5 : Single Bag: The plaster comes in a 50 lb bag for convenience and ease of use.
Color : White
CompatibleMaterial : Rubber
ExternallyAssignedProductIdentifier : 9145254940250
ExternallyAssignedProductIdentifier1 : 0794590556169
ExternallyAssignedProductIdentifier2 : 794590556169
GpsrSafetyAttestation : 1
ItemForm : Powder
ItemName : ULTRACAL 30 Gypsum Cement - Plaster - for Mold Making and Casting, Ideal for Latex Molds! Takes Excellent Detail (50 lb)
ItemPackageDimensions_Height : 5 inches
ItemPackageDimensions_Length : 24 inches
ItemPackageDimensions_Width : 12 inches
ItemPackageQuantity : 1
ItemShape : Heart
ItemShape1 : Cup
ItemShape2 : Tooth
ItemTypeKeyword : molding-and-casting-materials
Manufacturer : Laguna
Material : Acrylonitrile Butadiene Styrene
ModelName : D78
ModelNumber : D78
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : Ultracal 30
ProductDescription : Super-strength gypsum cement recommended where extreme accuracy and greater surface hardness are required, as in duplicator models. Harder and stronger than HYDROCAL A-11 and HYDROCAL B-11 cements, UltraCal 30 cement has the lowest expansion of any rapid-setting gypsum cement available. Has a gradual set and long period of plasticity. Ideal for splash-casting molds and models for phenolic, polyester and epoxy resins. It was designed to give the pattern making industry the ultimate in a gypsum cement tooling medium. MIX RATIO: The manufacture recommended mix-ratio of Ultra Cal 30 is (38 parts water to 100 parts) Ultra Cal 30 by weight. The average setup time is 25-35 minutes when manually mixed. Please note that parts can be in grams, ounces or pounds etc. Do not mix with your hands, A paint paddle or electric paint mixer is recommended. WARNING: This product is for making molds of industrial patterns only. When mixed with water, ultra cal undergoes a chemical reaction which causes it to harden and then slowly become very hot and highly alkaline (corrosive to skin like drain cleaner.) If mixed incorrectly this process can happen very rapidly. DO NOT attempt to make a mold enclosing any part of the body using this material. Failure to follow these instructions can cause severe chemical burns that may require surgical removal of affected tissue. Dust from products may cause eye, skin, nose, throat, or respiratory irritation. Use eye, skin, and respiratory protection in accordance with good industrial hygiene practices. Keep out of reach of children
ProductSiteLaunchDate : 2019-10-09T04:00:00.000Z
Size : 50 lb
Style : Garden
SupplierDeclaredDgHzRegulation : not_applicable
TargetAudienceKeyword : Unisex Children
UnspscCode : 31201600
WarrantyDescription : 90days
WaterResistanceLevel : waterproof