Cart 2 india

Specification
Brand : Fasco Epoxies
BulletPoint1 : Crystal Clear High Gloss Finish Makes it Perfect For A Variety Of Projects such as: Penny, Table Top, Bottle Cap Project, Bar Tops & Table Tops, Resin Art, Canvas, Encapsulation Projects, and Many More Artistic Projects.
BulletPoint2 : Self Leveling Easy to Use 1:1 By Volume Mixture Produces a Strong, chemical, and Water Resistant Coating
BulletPoint3 : Our 2 Gallon Kit Covers Approximately 24 square feet at 1/8" Thick
BulletPoint4 : Our epoxy mixes well with mica pigment powders for colored epoxy applications.
BulletPoint5 : Fasco Has been Manufacturing Epoxy Compounds and Coatings since 1957 Made in the USA
Color : Clear
CompatibleMaterial : Glass
CompatibleMaterial1 : Metal
CompatibleMaterial2 : Concrete
CompatibleMaterial3 : Fiberglass
CompatibleMaterial4 : Foam
CompatibleMaterial5 : Wood
ExternallyAssignedProductIdentifier : 00819794021029
ExternallyAssignedProductIdentifier1 : 0037936367242
ExternallyAssignedProductIdentifier2 : 037936367242
FinishType : gloss
Hazmat1 : ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S., Environmentally hazardous substance, liquid, n.o. s. (Propylidyn
Hazmat10 : CN_Unregulated
Hazmat11 : DE_Unregulated
Hazmat12 : EG_Unregulated
Hazmat13 : ES_Unregulated
Hazmat14 : FR_Unregulated
Hazmat15 : GB_Unregulated
Hazmat16 : IE_Unregulated
Hazmat17 : IN_Unregulated
Hazmat18 : IT_Unregulated
Hazmat19 : JP_Unregulated
Hazmat2 : UN3082
Hazmat20 : MX_Unregulated
Hazmat21 : NL_Unregulated
Hazmat22 : PL_Unregulated
Hazmat23 : SA_Unregulated
Hazmat24 : SE_Unregulated
Hazmat25 : SG_Unregulated
Hazmat26 : TR_Unregulated
Hazmat27 : US_Unregulated
Hazmat28 : ZA_Unregulated
Hazmat3 : III
Hazmat4 : 9
Hazmat5 : AE_Unregulated
Hazmat6 : AU_Unregulated
Hazmat7 : BE_Unregulated
Hazmat8 : BR_Unregulated
Hazmat9 : CA_Unregulated
IncludedComponents : gloves,mixing rods
ItemForm : Liquid
ItemName : Crystal Clear Epoxy Resin 2 Gallon Kit | Great for Wood Projects BarTops River Tables Tumblers Artist Quality| Two Part Kit Includes Resin and Hardener
ItemPackageDimensions_Height : 21.1074 centimeters
ItemPackageDimensions_Length : 17.1958 centimeters
ItemPackageDimensions_Width : 19.7104 centimeters
ItemPackageQuantity : 1
ItemShape : Rectangular
ItemTypeKeyword : molding-and-casting-materials
ItemVolume : 2 gallons
Manufacturer : Fasco Epoxies Inc.
Material : Cotton
Material1 : Epoxy Resin
Material2 : Resin
MaximumSize : 15.00 feet
ModelNumber : 39
NumberOfItems : 3
PartNumber : 39
ProductDescription : FEATURES: Clear gloss finish - Free from "sweat out" or exudation. 100% solids - contains no solvents or volatile's.
Tough, resilient coating with negligible shrinkage.
Can be pigmented any color.
Strong adhesion to wood, metal, concrete, fiberglass, foam, etc.
Good chemical resistance
USES: High build coating for bars, tabletops, decorative panels, coating Styrofoam, etc.
MIXING RATIO: Mix equal parts by volume of Part 1 Resin and Part 2 Hardener. MIX VERY THOROUGHLY to insure that all of the resin and hardener are completely combined together
POT LIFE: 25 minutes @ 72°F. Higher temperatures shorten pot life . Thin film set - 4 hours @ 72°f.
COVERAGE: 12 sq. ft. per mixed gallon
APPLICATION: Surface should be clean, dry and sanded. Apply in two coats. The first coat is a thin sealer coat to prevent any air from coming from the wood and causing bubbles. This coat is usually 1 millimeter (.04 inches) thick. The second coat is the finish coat. It should be applied thick enough to produce a smooth surface. This should take approximately 3 millimeters (.12 inches) of epoxy.
Air bubbles can come from a porous surface. They come up from tiny holes in the surface after the epoxy is poured. The solution is to apply a thin coat of 39 on the surface to seal it. After the coat dries, proceed with the rest of the application process. Air bubbles are created in the epoxy liquid when the two parts are mixed together. These bubbles appear immediately in the surface after it is poured. The solution is to heat the surface with a propane torch moved over the surface from a distance of about (12 inches). The heat will thin the epoxy surface and release the bubbles. It can also come from pouring the epoxy too thick in one pour. We recommend no more then an 1/8".
ProductExpirationType : Does Not Expire
ProductSiteLaunchDate : 2017-10-03T07:00:00.000Z
SafetyDataSheetUrl : http://www.dick-blick.com/msds/DBH_SDS_61944XXXX.pdf
Size : 2 Gallon Kit
SpecificUsesForProduct : Art, Craft
SpecificUsesForProduct1 : Craft
SpecificUsesForProduct2 : Model
SpecificUsesForProduct3 : DIY
SpecificUsesForProduct4 : Table Top
SpecificUsesForProduct5 : Woodworking
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TargetAudienceKeyword1 : Professional Audience
TargetAudienceKeyword2 : Teens
TargetAudienceKeyword3 : Adults
TargetAudienceKeyword4 : People
TargetAudienceKeyword5 : Professional Audience
UnitCount : 1
UnspscCode : 31201600
Viscosity : Low viscosity or thinner
WaterResistanceLevel : water_resistant